The use of stainless steel% off profiles framework polyurethane sealing foam ring with the door U-shaped groove edge design, with up to IP54 protection, widely used in automation and control of environmental protection and water treatment. 
 Standard configuration: a mounting plate; former single door rear panel; install stringer two; doors are fitted to the bar two; simple packaging. 
 Material: stainless steel 304/316, 2.0mm, 1.5mm mounting plate 2.5mm (galvanized), cabinet, door surface treatment: brushed protection class IP54. 

 Process characteristics 
 A door from the ground 25mm 2,2.5 mm thick galvanized mounting plate on both sides with 20mm wide U-shaped curved side, making the greater strength of the mounting plate, but also easy to handle 
 3, the bottom three cables into the cover can replace each other, easy to move, easy to import cable, easy opening line 
 4, multi-point grounding stud, safety and reliability 
 5, bearing hinges, easy to install, simple and efficient door swap 
 6, the plastic slip cited to block the use of plastic to the introduction by rail from the front mounting plate push the box 
 7, with a modulus of holes to enhance the square tube, not only can enhance the strength of the front door can also be used to install electrical components (with the door installation strip) 
 8, fixed backplane simple, quick and easy disassembly, can change the packing doors (front and rear door) 
 Fork lock, the next three o'clock lock to ensure the protection level, can also be requested by the user to configure other types of brand locks 
 10 seals: polyurethane foam sealing strip, to further ensure the protection class 
 11, waterproof folding box and door seals work closely together to effectively prevent water and dust from falling into the cabinet 
 12, (single door) about the interchangeable design, easy to use and on-site adjustment 
 13, the standard module installation design, installation flexibility 
 14, the inner light, convenient and weak dark environment, maintenance and testing (optional) 
 15, information boxes, data access easy and simple (optional) 
 16, installation of beams, do not use the mounting plate, install configure a certain number of beams can be combined flexible installation (optional) 
 17, fan and filter to ensure that the cabinet ventilation, protection class IP54 (optional) 
 18, the base is divided into fixed and movable, fixed installation simple and convenient, the movable installation flexible and easy to use 
 19 pairs of mounting plates, according to user requirements to the configuration around the double mounting plate, even the side mounting plate, the large installed capacity (optional) 
 20, door mounting bars, with the strengthening of square tube with holes of the modulus, convenient and flexible installation 
 Specializing in the production of standard, non-standard chassis cabinets, Dongming Electric intentions serve each customer.