Standard configuration: 
 A mounting plate; rear panel before a single door; install stringer two; doors are fitted to the bar two; simple packaging. 
 Material: 1.5mm cold-rolled steel door 2.0mm box to install board 2.5mm (galvanized) color: RAL7032, RAL 7035; surface: phosphating, powder coating. 
 Degree of protection IP54. 

 Process Features 
 1, the doors from the ground 25mm 
 2, 2.5 mm, thick mounting plate on both sides of 20mm wide U-shaped curved edge, making the greater strength of the mounting plate, but also easy to handle 
 3, the bottom three cables into the cover can replace each other, easy to move, easy to import cable, easy opening line 
 4, the door on the ground bolt 
 5, the load-bearing hinge is easy to install, for doors. Doors can be opened 130 ° 
 Plastic slip inducer can use plastic sliding cited by rail, the mounting plate from the cabinet a positive push into the cabinet 
 7, sturdy rectangular frame can not only enhance the strength of the front door, fixed installation electrical components can also be used (with the door installation strip) 
 8, the backplane can easily be installed using screws; can also be switched to the door 
 9 three-point fork lock, under the three-point locking doors 
 10 seals: polyurethane foam sealing strip to ensure the protection class 
 11, the cabinet door frames added at the water side and the door seals with the cabinet to prevent water and dust from falling into the 
 12, (single door) about the interchangeable door design, ease of use 
 13, the standard modulus of the mounting hole design, easy installation 
 14, the inner light, easy installation and testing 
 15, paper bags, to facilitate field work 
 16, the installation of beams, do not use the mounting plate can also be installed inside (optional) 
 17, fan and filter to ensure that the cabinet ventilation, protection class IP54 (optional) 
 18, the base, fixed, movable, demolition, installation is very convenient (optional) 
 19, door mounting bars for easy installation 
 20, the cabinet full frame side panels, front and back doors and roof, floor can be removed, and able to adapt to a variety of requirements, to facilitate the installation and maintenance. 

 Specializing in the production of standard, non-standard chassis cabinets, Dongming Electric intentions serve each customer.