Process characteristics 
 A door from the ground 25mm. 
 2, 2.5 mm, thick galvanized mounting plate on both sides of edge 20mm wide U-shaped bend, making the greater strength of the mounting plate, but also easy to handle 
 3, the bottom three cables into the cover can replace each other, easy to move, easy to import cable, easy opening line 
 4, multi-point grounding stud, safety and reliability 
 5, the plastic slip cited to block the use of plastic to the introduction by rail from the front mounting plate push the box 
 6, sturdy rectangular frame can not only enhance the strength of the front door, fixed installation electrical components can also be used (with the door installation strip). 
 7, a fixed backplane simple, quick and easy disassembly, can change the packing doors (front and rear door) 
 8 seals: polyurethane foam sealing strip, to further ensure the protection class 
 9, waterproof folding box and door seals work closely together to effectively prevent water and dust from falling into the cabinet 
 10 around the upper and lower door interchangeable design, easy to use and on-site adjustment 
 11, the standard module installation design, installation flexibility 
 12, the inner light, convenient weak dark environment, maintenance and testing 
 13, information boxes, data access is easy and simple 
 14, installing beams, do not use the mounting plate, install configure a certain number of beams can be combined flexible installation (optional) 
 15, fan and filter to ensure that the cabinet ventilation, protection class IP54 (optional) 
 16, the base is divided into fixed and movable, fixed installation simple and convenient, the movable installation flexible and easy to use (optional) 
 17 pairs of mounting plates, according to user requirements to the configuration around the double mounting plate, even the side mounting plate, the large installed capacity (optional) 
 18, door mounting bars, with the strengthening of square tube with holes of the modulus, convenient and flexible installation 
 Standard configuration: mounting plate a door to install the bar two. Files bag, install stringer two. Within the lamp, a switch. Before the upper and lower door panel; simple packaging. 
 Material: cold rolled steel door 2.0mm box 1.5mm mounting plate 2.5mm (galvanized) Color: RAL7032 surface treatments: phosphating, spray, protection class IP54. 
 Specializing in the production of standard, non-standard chassis cabinets, Dongming Electric intentions serve each customer.